Hydrokraft Technologies

The Hydraulic Punching Machine MX340G Nargesa main feature is its verstility. It can make several functions as punching operations in metal sheet, flat bar, pipe angle, U-T-UPN-IPN profiles, folding, cutting, tuve notching, inlaying, punching, bending sheets, stamping... It can be suitable for any other kind of tooling.

Hydraulic Press Brakes MP1400CNC MP2003CNC MP3003CNC

TECHNICAL FEATURES:
STANDARD EQUIPMENT INCLUDED
Automatic control of vertical bending axis (Y axis).Back gauge fitted with BOSCH REXROTH recirculating ball screw guides, ESA servo motor automatic control of horizontal axis (X axis), manual control of vertical axis (R axis) and manual control of transverse axis (Z axis) with parallel alignment and curvature adjustment.Motorised vertical axis (R axis) of back gauge, controlled by ESA servo motor. (Optional accessories, not included with the machine) See footnotes OPTIONAL ACCESSORIESPromecam punch clamping system with segmented flanges.Euro Promecam system with die guiderail.Promecam punch, reference PS.135.85.R08, induction tempered in working and grinding zones. See footnotes INCLUDED ACCESSORIESPromecam die, reference M.460.R, induction tempered in working and grinding zones. See footnotes INCLUDED ACCESSORIESESA numerical control, reference S630.Adaptive electronic pressure control.Chassis bending electronic compensator.GIVI MISURE high-precision optical encoder, 0.005 mm resolution.Hydraulic unit with 24 VDC redundant safety valves with optics and pressure indication.Electronic compensation of hydraulic oil temperature.Front arms which slide on linear recirculating ball screw guides for optimum sheet metal grip.Side doors with electronic safety control.High-frequency laser sensor system unaffected by external light sources.Software-configured electronic muting system.LED directional light strip for bending zone.Ethernet 10/100 Mbit LAN connectivity.USB 2.0 ports and VGA connector for updates, backup and peripherals.10" colour touchscreen graphics interface, high-resolution, multi-language (over 20 languages).Basic software installed in the CNC control containing a full library of Promecam punches and dies, and for creating, modifying and editing bending programs in numerical mode, which can be enlarged with additional software modules.Optional installation in the basic CNC control of software modules with bending simulator and CNC optimizer for the creation of 2-D graphics of bending program with the most efficient sequence. (Optional accessories, not included with the machine) See footnotes OPTIONAL ACCESSORIESComplete software for Windows PC with bending simulator and CNC optimiser for 2-D graphics programming of bending sequence, with full library of Promecam punches and dies.Technical Features​
Punch working speed: 9,3 mm/s.Return speed of the punch: 29,8 mm/s.Lowering speed of the punch: 29,8 mm/s. Maximum punch displacement: 115 mm.Inner folding length: 1255 mm.Total folding length: 1455 mm.Back gauge displacement: 600 mm.Neck: 185 mm.Motor power: 4 KW / 6 HPThree phase power: 230 / 400 VHydraulic Power: 40 TnDimensions: 1966x1520x2035 mmWeight: 2900 KgThe machine is delivered completely assembled.
All our products are manufactured in our facilities in Spain. Hydraulic and electtronic components are completely standard from the best European leading trademarks, with technical support all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...

Forging Twisting Machine MT150A MT150R MT500A

TECHNICAL FEATURES:
 Working method by twisting and flexion in COLD.
Machine suitable for small, medium and big production.
Safe and reliable transmision by a mmotor reducer with flat treated pinions, achieving a remarkable performance ans least maintenance.
Perfect formaking all kinds of ornamental standard parts and essential to make our own designs, a lot more demanded in the market. The pieces requested by architects, technicians and final customers, make it a very important tooling in a blacksmith workshop.
In order to make this kind of special job, Nargesa provides the user with the fitting plates, under request, so the very customer can make his own designs himself.
The twisting machine Nargesa MT150A is equipped with a complete set of standard tooling, by means of which tha user can make a great deal of shapes: twisted, scrolls, bendings, hooks,  chains,... (More information in STANDARD TOOLING  at the bottom of this page).
There is also the possibility  of buying optional tooling: Belly top railing tooling, British rail, flat ben rings, decorative baskets... (More information in OPTIONAL TOOLING  at the bottom of this page)
The difference between the scrollmake MT150R and MT150A is that this  latter has got an NC that enables it to make bigger productions.

          Technical features
Max. twisting capacity 20mm or 3/4" inch.Max. bending capacity 16mm or 5/8" inch.Max twisting and bending capacity in flat bar,  clod or hadrail 35X10mm or 1 1/4"X3/8" inch.Possibility of buying the tooling for the machine in mm or inches.Max. continuous scrolling length 960mm.Engine power: 0,37Kw / 0,5 HP.CNC programmer to repeat series, piece counter, automatic unbolt, memories...Adjustable millimeter scale on its head to make all parts the same.Electric panel command with double button, right and left , which makes it a very easy handling machine.2-phased tension: 230 V. Single phased.For single phased machines please ask quotation.Rotation speed controllerAdjustable rotation speed from 0 to 5 r.p.m.
Lower bench palletized to move the machine easily to the working site or storage.The machine is delivered completely mounted.Packaging with fumigated wooden pallet  NIMF 15 and a 3-layered cardboard box suitable for sea freight.Optional complete wooden packing NIMF15. Its robustness, versatility and easy handling condition turn it into one of the best machines for an ornamental blacksmith workshop.
 
All our products are manufactured in our facilities in Spain. Electric and hydraulic components are completely standard and from the best European leading trademarks with technical support all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...

Maximum capacity in round: Mild steel round of 20mmMaximum capacity in square: Mild steel square of 20mmMaximum capacity in flat bar: Mild steel flat bar of 40x10mmDigital screen.Turns programmer.Rotation speed: 20 rpm Adjustable back gauge.With standard accessories wrought ends, flat ends, striated and pyramidal ends can be made. (See STANDARD TOOLING below.)OPTIONAL ACCESSORIES (See below) If the customer asks for it, we make molds under request.Engine power: 5,5 KW/ 7 CV (HP)Three phased tensión: 230/400 VFor other tension or single phased machines, please ask the manufacturer.Palletized lower bench to easily move the machine up to its working place or storage.The machine is sent completely mounted Packaging with a wooden pallet NIMF15 and 3-layered cardboard box suitable for sea freight.Optional: Complete wooden packaging with fumigated wood NIMF15.
ADVANTAGES:
Easy handling: Any worker is able to carry out this job, even without any previous preparation.Readiness: Thousands of parts can be made in a sole working day.Value and prestige: There are few craftmen who can make this kind of wrought jobs.Sales: Possibility of selling parts with the forged extremes to different companies or steel stores.All or products are manufactured in our facilities in Spain. The hydraulic and electrical components are all standard from the best leading European trademarks, with technical assitence all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...

The purpose of NOA60 Nargesa is to conform and emboss designs on cold flat bars, square bars and square pipes. The shapes and the design of the job will be depend on the rollers used.

ADVANTAGES OF THE MACHINE
Ease of use: Any worker can do the job; no training is necessary.Highly efficient production: Thousands of components can be made in a single working day. No surplus material: The design of the machine enables the surface of the material to be completely embossed, so there is no loss of material.Value and exclusivity: All the work with a design is exclusive and adds economic value to the components manufactured.  Sales: Offers the possibility of selling the embossed components to different companies or iron warehouses.Toughness: This embossing and stamping machine is designed to supply medium and large-scale production, working up to 20 hours a day. TECHNICAL SPECIFICATIONS
Electric motor: 5.5 KW Power (7.5 HP) at 1400 r.p.m.Electricity supply: 230/400 V three-phaseElectricity consumption: 22/12 AAdjustable working speed:  0 - 10 metres per minute. Maximum capacity on square tube: 60x60 mmMaximum capacity on solid square block: 20x20 mmMaximum capacity on plates: 60x10 mmTempered gear transmission.Heavy duty roller bearings: Indispensable to guarantee the robustness and durability of the embossing machine.Tempered and ground shafts.Upper and lower shafts motorised, indispensable for good operation. Includes a straightening device with adjustable 7 rollers, 3 vertical and 4 horizontal. This mechanism ensures the material comes out perfectly straight.Large catalogue of rollers of different designs (See optional accessories at the bottom of the page. At the client's request, we can manufacture tailor made moulds, increasing the value of the finished product with exclusivity and personalization.Lower bench palletized to easily transport the machine to the workplace or store it in case of lacking space.Palet made of steel and 3 layer cardboard box suitable for seafreight.Optional: Fumigated wooden box NIMF15.
All our products are manufactured in our facilities in Spain. The hydraulic and electronic components are completely standard and from leading European brands, with service worldwide: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...

The Pipe Bending Machine is made of steel sheet, machined and screwed. It has been designed to achieve high performance and it is ideal for bending and manufacturing flanges, greenhouses, railings, tables, chairs, doors, gates, windows...in different profiles.

Specifications:

• Vertical and horizontal working position.
• Two Traction Rollers.
• Gear Transmission
• Correction rollers on the sides

The Vertical Broaching Machine is suitable for any mechanised workshop. It is strong, fast and it could be easily prepared to work, its standard features provide it with great versatility at manufacturing several kinds of broach works.

Features:

• Optimum functionality
• High efficiency
• Less maintenance

We are engaged in offering a wide range of Hydraulic Shearing Machine.

TECHNICAL FEATURES:
General Characteristics
ADVANTAGES OF VERTICAL CUT INSTEAD OF SWING CUT:
Energetic saving:Resistance of material in vertical cut is much lower, which becomes a considerable energetic saving.
Cutting quality:Clean, perfect and accurate cut.
Life of the blades:The blades wear is almost nule. The life of the blades is 4 times higher than other shearing systems.

Technical Features
Cutting length: 3030mm.Cutting capacity: 6mm in steel (450N/mm2)andy 4mm in S.S.(700N/mm2)CNC back gauge.Digital display. Gauge displacemnt: 700mm. Accuracy and repeatability of positioning from +/- 0,1mm. 4-edged lower and upper blades Suitable for stainless steel. Goose neck for cuts with bigger length: 173mm. Cutting area lit up by leds. Thin marking zone for manual cutting. Strokes per minute: 12 Strokes. (All length) Independent hydraulic rammers: 15 units. Millimeter squaring arm, 1000mm length. Two 1000mm-millimetered stand arms. Fix cut inclination: 1,75º Driving with safety pedal and emergency stop. Back overture with safety opto electronic devices. Motor power: 9,2 KW/ 12 HP 3-Phased tension: 400 V. Hydraulic Pump: 22 liters. Container capacity: 96 liters. The machine is delivered completely assembled.



All our products are manufactured in our facilities in Sapin. Hydraulic and electronic components are completey standard from the best European leading trademarks, with technical servie all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...

Forging Furnaces H1, H2 and H4 are designed to heat up steel. They are used in blacksmith's workshops for the ornamental forging.

Features:

• Fast reaching of working temperature.
• Easy ignite
• No harmful emissions

Power Hammers MP50 MP60

Power Hammers or Pile drivers MP Nargesa, are manufactured in welded and mechanised steel sheet. They are used in many blacksmith workshops to make all kinds of forging ornamental pieces which eases the job of moulding hot steel. Different tooling are used: for inlaying, moulding, cutting, piercing, rivetting, embossing, etc., in all kinds of metals.

TECHNICAL FEATURES:
 The Powerhammer MP Nargesa works by two cylinders, one at the back and another one at the front  which is the one that impulses the stem for the stroke.
The motor for the powerhammer moves the rod of the back cylinder or compressor and the compressed air goes to the front cylinder through the valves that control the stroke displacement. 
Compressor incorporated: No need for any external compressor.Frame made of  welded and mechanized steel, it isn't made of casting.Automatic greasing system.Cylinders made of GG2I to ensure a good performance.Orientable cylinder to ease up the operative's work.Front protection against any projections.Protection for the driving pedal.Electric protection of the engine.Emergency stop.Moulds made of a special  steel to stand big impacts at quite high temperatures.Great variety of tooling and exchangeable moulds. (For more information, see Optional Tooling at the bottom of the page)Manufacturing of tooling as requested.
                             Technical Features 
Nominal dropping weight: 50 Kg.Strokes per minute: 220Strokes max. displacement: 230mmMax. round working capacity: 60mmMax. square working capacity: 50x50mmEngine power: 5,5 KwWeight: 1187 Kg
The machine is sent completely assembled.
Packing with wooden pallet and retractile film.
Optional: Complete wooden packing NIMF15.
All our products are manufactured in our facilities in Spain. Hydraulic and electric components are completely standard from the best European leading trademarks, with technical support all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...

The End Hot Wrought Machine Nargesa PC 16, eases up the rolling job of hot steel. It rolls up the snail forged shaped end. This decortions are commonly used as extremes in scrolls and decorative parts. Gates, Windows, Fencing, Metal Furnitures etc.,

TECHNICAL FEATURES:
Adjustment of displacement or turns.Adjustment of pressure according to material thicknes.Safety double command for the cycle drive.Hydraulic clamp for the piece fastening.Maximum capacity in round: 20mmMaximum capacity in square: 20mmMaximum capacity in flat bar: 50x10mmWorking speed: 45 mm/sReturn speed: 70 mm/sCycle time: 10 secodnsPieces per minute: 4 pieces.Engine power: 2,2 KW/ 3 CV (HP)Three phased tensión: 230/400 VFor other tension or single phased machines, please ask the manufacturer.Palletized lower bench to easily move the machine up to its working place or storage.The machine is sent completely mountedPackaging with a wooden pallet NIMF15 and 3-layered cardboard box suitable for sea freight.Optional: Complete wooden packaging with fumigated wood NIMF15.ADVANTAGES:
Easy handling: Any worker is able to carry out this job, even without any previous preparation.Readiness: Thousands of parts can be made in a sole working day.Value and prestige: There are few craftmen who can make this kind of wrought jobs.Sales: Possibility of selling parts with the forged extremes to different companies or steel stores.All or products are manufactured in our facilities in Spain. The hydraulic and electrical components are all standard from the best leading European trademarks, with technical assitence all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...

Hydraulic Press for locks PI85 Nargesa, is a NOVELTY in the locksmith's branch. It as patented by Nargesa from year 2006. It makes us lead this kind of machinery. It is suitable for 85% locks in the market, regarding trademarks and models.

TECHNICAL FEATURES:
 The Hydraulic Press PI85 NARGESA, is a NOVELTY  in the world of locks. It was patented by  Nargesa  in 2006 which makes us leaders in the manufacturing of this kinds of machines. They fit 85% of locks of all trademarks and models. 
 Normally, one operative has an average time between 30 - 45 minutes to make one whole operation for a casing, handle holes and the lock hole in a square or rectangular pipe. With the PI85 Nargesa the time gets reduced to less than one minute. This is a machine for high production.The finish is perfect, with the proper tolerance to place the lock with no need to use a bezel. Thus the assembling time is minimum.Many companies that have bought this press for locks PI85, not only for their own use but also to sell the ready-to-be-used pipes to other companies.The pipes that can be used with the machine are 35x35, 40x40, 40x50, 40x60, 40x70, 40x80, 50x50, 50x60, 50x70 and 50x80.Pipe thickness can be 1,5mm and 2mm. No matter the material, it can either punch normal steel, galvanized steel or stainless steel.It's important to bear in mind the casing must be always made in the side of  35, 40 or 50mm.The perforation of the lock hole  and the handle could be combined, it means we can punch a pipe with lock and handle on both ends,  as we can as well make either the handle or the lock in the other.The casing length is adjustable as it is as well the entrance of the  lock. It ranges from 18mm to 37mm.Characteristics of the machine
Hydraulic punching system.Safety pedal.Operation time  58 secodns (approximately).Type of keyhole: Bombin.Type of material: M.S., S.S., Galvanized steel...Pipe Thickness: 1,5mm and 2mmAdjustable casing length.Adjustable lock entrance from 18mm to 37mmPI 85 distance between axis 85mmMotor power: 0,75 KW / 1HP.3-phased tension: 230/400V.For single phased machines ask quotation.
Lower bench palletized to move the machine easily to the working site or storage.The machine is delivered completely assembled.Packing with a steel pallet  and a 3-layered cardborad box suitable for sea freight.Optional: Complete wooden packing NIMF15.
All our products are manufactured in our facilities in Spain. Hydraulic and electronic components are completely standard from the best European leading trademark with technical support all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...

The versatility of the 20 Tons Horizontal Press Brake Nargesa PP200 allows us to bend, fold, cut and shape in cold, stretch and reduce, inlay, notch and assemble..

TECHNICAL FEATURES:
Horizontal Bending Press Brake PP200 has been manufactured in a 60mm thick welded steel monoblock, stabilized and mechanized. Its robustness, versatility and easy handling are just three of the best features our hydraulic horizontal bending machine has.
ADVANTAGES
Easy handlingt: The machine is sent completely assembled, it is only necessary to connect it to the required power supply and start perfoming.Versatility: Nargesa PP200 has a catalog with a great deal of optional tooling. (See at the bottom of the page in optional toling and sample video)Easy fabrication of tooling: The customer himself or any toolmaker can manufacture dies and punches. Folding operation with no risk of damaging the punches and dies with thick materials unlike conventional press brakes.Folding flat bars and sheets into completely close shapes. Conception of this horizontal bending press brake allows to make folding operations impossible to be carried out on a conventional press brake.Fast tool change, punches and dies: This change does not take more than 30 seconds most of the times. STANDARD TOOLING: Horizontal press brake PP200 includes the complete 4V’s folding die. (See bottom of the page in standard accesssories)
Technical Caracteristics of the Horizontal Hydraulic Press Machine
Working strength: 20.000 Kg (200 KN)Working speed: 10 mm/sReturn speed: 35 mm/sMaximum displacement: 250 mmRepetitivity: 0,05 mmBench size: 600x1170 mmWorking height: 950 mmProgramming mode: Manual or Automatic.Safety Double acting hold pedal.Mechanically Guided Piston.Piece counter.Pressure regulator.Engine power: 2.2 KW/3 HP a 1400 r.p.m.Electric Tension: 230/400 V three-phasedIntensity: 9/5 AHydraulic pressure: 50 a 215 Kg/cm2Hydraulic pump: 7,5 litres/minuteTank Capacity: 27 litresDies support shelf included.Machine dimensions: 760x1174x1150 mmWeight: 625 KgPalletized lower bench to easily transport the machine up to its working or storage site.The machine is sent completetly assembled.Packing included: Wooden pallet NIMF15 and three layer cardboard apt for suitable for sea freight.All our products are manufactured in our facilities in Spain. Hydraulic and electrical components are all standard from the best leading European trademarks with technical support all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato, etc...

Additional Information:

• Item Code: PP200

The Welding positioner TS10 Nargesa, is equipped with a control panel which makes it one of the most reliable and complete in the market. It can make continuous and discontinuous welding, work in manual mode, automatic mode, degrees programming, overlapping programming... Its special for making high precision circular welding. Exhaust pipes for both, cars and motorbikes, hydraulic pistons, circular containers, boilers, pinions, basket rings..

TECHNICAL FEATURES:
TS10 is compatible with any welding equipment in the market, no matter whether it is old or modern. It rules the welding machine authorizing the place where the welding starts and where it ends.Its versatility and easy handling make it one of the best welding positioners in the market, able to make any piece.

It''s special for any kind of welding TIC, MIG, MAG, Autogenous, electrode... etc. It''s protected against high frequency.Different working modes:Manual: When the worker activates the pedal, the plate moves and when he releases the pedal, the plate stops.Automatic: The worker places a piece on the TS10 plate, activated the pedal and the welding positioner indicates the machine to start up welding and stop in the programmed point. The operative only has to put the piesces in and take them off.Robot mode: El TS10 activates the welding Robot so it moves to the piece and activates the welding operation. It''s compatible with any welding Robot.Its capacity to regulate multiple functions makes it different from others. 95% of wleding positioners can only carry out a complet 360º welding operation with a limit. TS10 will make other kinds of welding. It can as well weld in a discontinuous way. Th operative programs how he wants the piece welding, where to begin, how many grades between welding and welding, how many pieces he wants to weld... etc. The aim of using the TS10 Nargesa is to achieve a perfect finish, nice to the eye, very reliable,poreless and to obtain a high production.Programmable plate displacement (0º-360º).Adjustment of plate inclination (0º-100º).Overlapping regulation in degrees.Regulation of the starting time fon welding delicated parts.Continuous or discontinuous welding.Optoelectronic communication.memory programming up to 256K.Digital display.Horizontal maximum capacity: 75 kg.Vertical Maximum capacity: 55 kg.Motoreducer cooled with oil, whic allows an almost a nule speed withour heating.Motor power: 0,12 KW.2-phased tension: 230 V. Single phased.Adjustment of rotary speed: 0 - 64 rad/s.Plate Diameter : 400 mmPlate thickness: 10 mmTable height: 790 mmThe machine is delivered completely mounted.Packaging is made with wooden pallet NIMF 15, fumigated and a 3-layered carboard box, suitable for sea freight.Optional: Complete wooden packaging NIMF15.All our products are manufactured in our facilities in Spain. Hydraulic and electrical componentes are completely standard and from the the best leading European trademarks which havetechnical support all around the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato etc...
It is according to the European directives and regulations for machinery manufacturing CE

The new generation of CC60 Non-mandrel tube and pipe bender can bend up to 180º curves on hollow profiles ensuring the best bent finishes in today’s market. Equipped with a Touch Screen control grant the user interactaction with the standard features offered using the latest 4.0 technology. The sleek look, versatility and faster bending speeds also allows us to have one of best machines offered in our industry. Materials can be round, oval, square, rectangular and made of different metals such as steel, aluminum, stainless steel, copper...

All Nargesa’s Products are according to CE regulations for the manufacturing of industrial machinery.

The mandrel-less tube and pipe bending machines Nargesa are perfect for making curves with a constant quality for pipes, tubes, square bars, rods and other profiles.

• Maximum size on S275 round steel pipe: 60.3 mm or 2” Schedule 40 or 2” ISO x 5 mm.
• Maximum size on aluminum pipe: 60.3 mm x 8 mm / 2.375” x .315”
• Maximum size on stainless steel pipe 304 / 316: 60.3 mm x 4 mm / 2.375” x .160”
• Maximum size on square tube: 40 x 40 x 4 mm / 1.50” x 1.50” x .160”
• Maximum angle of curvature: 180º
• Minimum radius of curvature: 3 times the pipe diameter.
• Maximum radius of curvature: 320 mm
• Automatic rotation speed from 0.7 up 4.5 rpm
• Repetition on the curve of +/- 0.1 degrees
• Reinforcement tool post support arm for pipes with diameters over 40 mm included.
• 400 ml BEND 8 lubricant included.
• Two bending directions, right or left for easier bending.
• Quick die change over: Maximum 60 seconds.
• 4.0 Technology
• CNC control with 7” touchscreen with more than 20 different languages
• Safety pedal to the right and left.
• Side shelving to store tools.
• All bend dies are made of tempered steel for longer tool life.
• The counter dies are made of bronze alloys to help prevent markings on the outside of the bent profiles.
• Stores up to 10,000 programs.
• Up to 50 different angles on the same piece can be programmed.
• Dimensions can be programmed in inches or millimeters.
• Pivot system with automatic unlocking to help remove material.
• Automatic and programmable spring back correction.
• Automatic unlocking
• Automatic and programmable springback
• Offset head for complex parts.
• Reinforcement tool post support included
• Packaging included
• Motor power: 1.1 KW / 1.5 HP.
• Electrical voltage: 230V single phase 50/60Hz
• Optional voltage: 110V single phase 50/60Hz
• Intensity: 4.5 A
• Machine weight: 360 Kg / 794 Ibs
• A lower pallet bench to transport the machine to the worksite or storage.
• The CC60 pipe bender is sent completely assembled.
• An wooden pallet and 3-layer cardboard box suitable for seafreight.
• Optional: NIMF15 wooden container.

 

All our products are manufactured in our facilities in Spain. Hydraulic and electrical components are all standard from the best leading European trademarks with technical support all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato...

Additional Information:

• Item Code: CC60CNC
• Delivery Time: 8 to 16 weeks
• Packaging Details: Width: 730 mm. Length: 1090 mm. Height: 1340 mm. Volume: 1,066m3 Nett weight: 360 Kg. Gross Weight: 385 Kg.